How To Fix Your Dishwasher Seal: A Step-By-Step Guide

OEM KitchenAid Dishwasher Dishwasher Door Seal [W11177741] Ships from www.fix.com

Introduction

If you notice that your dishwasher is leaking water or not cleaning dishes properly, it could be because of a faulty seal. A dishwasher seal is a rubber gasket that prevents water from leaking out during a wash cycle. Over time, the seal can become worn or damaged, causing leaks and other issues. In this article, we’ll show you how to fix a dishwasher seal in easy-to-follow steps.

Step 1: Turn Off Power

Before you start working on your dishwasher, make sure to turn off the power. You can do this by unplugging the power cord or turning off the circuit breaker. This will prevent any accidents from happening while you’re working on the seal.

Step 2: Remove the Dishwasher Door

To access the seal, you’ll need to remove the dishwasher door. This can usually be done by removing a few screws around the edges of the door. Once the screws are removed, gently lift the door off its hinges and set it aside.

Step 3: Remove the Old Seal

Now that you have access to the seal, you can begin removing it. Start by peeling off any loose or damaged parts of the seal. Then, use a pair of pliers to grip the seal and pull it out of its track.

Step 4: Clean the Area

Before installing the new seal, it’s important to clean the area where the old seal was. You can use a damp cloth to wipe away any dirt or debris.

Step 5: Install the New Seal

Take the new seal and insert it into the track where the old seal was. Make sure it fits snugly and is evenly distributed around the entire door.

Step 6: Reattach the Door

Once the new seal is in place, you can reattach the dishwasher door. Line up the hinges and gently lower the door back into place. Replace any screws that were removed.

Step 7: Test the Dishwasher

Now that the seal has been replaced, it’s time to test your dishwasher. Run a cycle to make sure there are no leaks or other issues. If everything looks good, you’re done!

Tips for Maintaining Your Dishwasher Seal

To prevent future issues with your dishwasher seal, here are a few tips to keep in mind: - Regularly clean the seal with a mild detergent and water - Avoid using harsh chemicals or abrasive cleaners on the seal - Inspect the seal for signs of wear and tear, and replace as needed - Don’t overload your dishwasher, as this can put undue pressure on the seal

Conclusion

Fixing a dishwasher seal is a simple process that can save you time and money in the long run. By following these easy steps, you can have your dishwasher running smoothly once again. Remember to take care of your seal to prevent future issues and keep your dishwasher in top shape.

Location:

animalh002