KitchenAid Dishwasher Door Spring Replacement WP8270020 YouTube from www.youtube.com
Introduction
If you own a KitchenAid dishwasher, you know that it is a reliable and efficient appliance that can make your life easier. However, like any other machine, it can develop problems over time. One of the most common issues with KitchenAid dishwashers is a broken door tension spring. This can cause the dishwasher door to become loose or difficult to open and close. In this article, we will show you how to fix this problem yourself without the need for professional help.
What is a Door Tension Spring?
A door tension spring is a small but important component of your KitchenAid dishwasher. It is responsible for keeping the dishwasher door closed and preventing it from opening during the wash cycle. The spring is located at the bottom of the dishwasher and is attached to the door hinge.
Step-by-Step Guide to Fixing a Broken Door Tension Spring
Step 1: Turn off the Power
Before you start working on your dishwasher, you need to turn off the power. This can be done by unplugging the dishwasher or turning off the circuit breaker that powers it.
Step 2: Remove the Front Panel
To access the door tension spring, you need to remove the front panel of your KitchenAid dishwasher. This can be done by unscrewing the screws that hold it in place.
Step 3: Locate the Door Tension Spring
Once you have removed the front panel, you need to locate the door tension spring. It is usually located at the bottom of the dishwasher and is attached to the door hinge.
Step 4: Remove the Broken Spring
Using a pair of pliers, carefully remove the broken door tension spring from the door hinge.
Step 5: Install the New Spring
Take the new door tension spring and attach it to the door hinge. Make sure that it is properly aligned and securely attached.
Step 6: Test the Door
Once you have installed the new spring, test the dishwasher door to make sure that it opens and closes smoothly. If the door still feels loose or difficult to open and close, you may need to adjust the tension on the spring.
Step 7: Reassemble the Dishwasher
Once you have tested the door and are satisfied with the results, you can reassemble the dishwasher. This involves putting the front panel back in place and screwing it in securely.
Tips for Maintaining Your KitchenAid Dishwasher
Prevention is always better than cure, and this is especially true when it comes to your KitchenAid dishwasher. Here are some tips to help you maintain your dishwasher and prevent future problems:
1. Clean the Dishwasher Regularly
Make sure to clean your dishwasher on a regular basis to prevent the buildup of dirt and debris. This can be done by running a cycle with vinegar or a dishwasher cleaning solution.
2. Check the Door Seal
Make sure to check the door seal regularly to ensure that it is in good condition. If it is damaged, replace it immediately to prevent leaks.
3. Use the Right Detergent
Make sure to use the right detergent for your dishwasher. Using the wrong detergent can damage your dishwasher and cause problems with the door tension spring.
Conclusion
Fixing a broken door tension spring on your KitchenAid dishwasher is a simple task that you can do yourself. By following the steps outlined in this article, you can save money on professional repairs and keep your dishwasher running smoothly. Remember to take care of your dishwasher by cleaning it regularly and using the right detergent, and you'll enjoy years of trouble-free use.
Location:
Share :
Post a Comment
for "Kitchenaid Dishwasher Repair: Fixing A Door Tension Spring"
Post a Comment for "Kitchenaid Dishwasher Repair: Fixing A Door Tension Spring"